Hardrise test fiche tech®

HARDRISE®is a range of hard coatings designed to protect and enhance any kind of plastic substrate.

The use of plastics in the design and manufacturing of optical elements, whether lenses or protective glass, is becoming increasingly popular. This type of material offers a solution to the demand for lightweight optical systems while reducing the carbon footprint of their production and use. Although they offer many advantages, these polymer materials are often fragile, especially when subjected to mechanical, chemical or photo-oxidizing stresses.  The HARDRISE® portfolio offers comprehensive solutions to protect and enhance the performance of optical elements in order to limit signs of ageing, protect them from scratches, and make their surface water and oil repellent.

As each application is unique, we customize our existing HARDRISE® solutions according to our customers’ specifications.

They can be applied using a dipping, spraying, spin or flow coating process and can be cured in an oven or by UV radiation.

Filters

Product selector

Enter your parameters and we will present you with our corresponding product

Enter your parameters..
Reset
Reset
Reset

Hardrise PHT02

DATASHEET
Application : Exterior
Curing : Thermal
Substrate : PC
  • Layer thickness : [2µm – 6µm]
  • Optical clarity : Good
  • Refractive index : 1,49
  • Adhesion : 0
  • Immersion bac ford : Pass
  • Abrasion CS10F2 :  DHaze=0,4%
  • Falling sand abrasion test :
  • Abrasion ISO9211-4 : Severity 2
  • WoM : Pass
  • UV resistance :
  • Water contact Angle : 94°
  • Humid heat resistance : Do not pass
  • Damp heat resistance : Pass
  • Thermal shock : Pass
  • Antistatic : On demand

1 : Adhesion in accordance with ISO2409 tape 3M2525 and SCAPA 8705B  – 2 : Test conducted with a Crockmeter for 200 strokes at 7.5N. The measurement of the haze difference is carried out before and after the test. – 3  Linear abrasion test with 500g weight (or 5N) Fabric CCC-C440C (kind of gauze). The result is expressed in severity number, for example if 2 is indicated then the product passes level 2 of the standard without any scratches. Severity1 -> Cheesecloth / 50 strokes / 5N – Severity2 -> Cheesecloth / 100 strokes / 5N – Severity3 -> Eraser / 20 strokes / 10N – Severity4 -> Eraser / 40 strokes / 10N” – 4 Pencil Hardness in accordance with ISO15184  – 5 Immersion 96h @40°C – 6 in accordance with SAE J2412-2015 with water spray.

For more informations contact us

Hardrise PHT02

DATASHEET
Application : Exterior
Curing : Thermal
Substrate : PMMA
  • Layer thickness : [2µm – 6µm]
  • Optical clarity : Good
  • Refractive index : 1,49
  • Adhesion : 0
  • Immersion bac ford : Pass
  • Abrasion CS10F2 :  DHaze=0,4%
  • Falling sand abrasion test : DHaze<10%
  • Abrasion ISO9211-4 : Severity 2
  • WoM : Pass
  • UV resistance :
  • Water contact Angle : 95°
  • Humid heat resistance : Pass
  • Damp heat resistance : Pass
  • Thermal shock : Pass
  • Antistatic : On demand

1 : Adhesion in accordance with ISO2409 tape 3M2525 and SCAPA 8705B  – 2 : Test conducted with a Crockmeter for 200 strokes at 7.5N. The measurement of the haze difference is carried out before and after the test. – 3  Linear abrasion test with 500g weight (or 5N) Fabric CCC-C440C (kind of gauze). The result is expressed in severity number, for example if 2 is indicated then the product passes level 2 of the standard without any scratches. Severity1 -> Cheesecloth / 50 strokes / 5N – Severity2 -> Cheesecloth / 100 strokes / 5N – Severity3 -> Eraser / 20 strokes / 10N – Severity4 -> Eraser / 40 strokes / 10N” – 4 Pencil Hardness in accordance with ISO15184  – 5 Immersion 96h @40°C – 6 in accordance with SAE J2412-2015 with water spray.

For more informations contact us

Hardrise PHT03

DATASHEET
Application : Interior
Curing : Thermal
Substrate : Polyamide
  • Layer thickness : [2µm – 6µm]
  • Optical clarity : Good
  • Refractive index : 1,5
  • Adhesion : 0
  • Immersion bac ford : Pass
  • Abrasion CS10F2 :  Pass
  • Falling sand abrasion test :
  • Abrasion ISO9211-4 : Severity 3
  • WoM :
  • UV resistance :
  • Water contact Angle : 95°
  • Humid heat resistance : Pass
  • Damp heat resistance : Pass
  • Thermal shock : Pass
  • Antistatic :

1 : Adhesion in accordance with ISO2409 tape 3M2525 and SCAPA 8705B  – 2 : Test conducted with a Crockmeter for 200 strokes at 7.5N. The measurement of the haze difference is carried out before and after the test. – 3  Linear abrasion test with 500g weight (or 5N) Fabric CCC-C440C (kind of gauze). The result is expressed in severity number, for example if 2 is indicated then the product passes level 2 of the standard without any scratches. Severity1 -> Cheesecloth / 50 strokes / 5N – Severity2 -> Cheesecloth / 100 strokes / 5N – Severity3 -> Eraser / 20 strokes / 10N – Severity4 -> Eraser / 40 strokes / 10N” – 4 Pencil Hardness in accordance with ISO15184  – 5 Immersion 96h @40°C – 6 in accordance with SAE J2412-2015 with water spray.

For more informations contact us

Hardrise PHT06

DATASHEET
Application : Interior
Curing : UV
Substrate : PC
  • Layer thickness : [4µm – 6µm]
  • Optical clarity : Good
  • Refractive index : 1,54
  • Adhesion : 0
  • Immersion bac ford : Pass
  • Abrasion CS10F2 :  DHaze=0,4%
  • Falling sand abrasion test :
  • Abrasion ISO9211-4 : Severity 2
  • WoM : Don not pass
  • UV resistance :
  • Water contact Angle : 97°
  • Humid heat resistance : Pass
  • Damp heat resistance : Pass
  • Thermal shock : Pass
  • Antistatic : On demand

1 : Adhesion in accordance with ISO2409 tape 3M2525 and SCAPA 8705B  – 2 : Test conducted with a Crockmeter for 200 strokes at 7.5N. The measurement of the haze difference is carried out before and after the test. – 3  Linear abrasion test with 500g weight (or 5N) Fabric CCC-C440C (kind of gauze). The result is expressed in severity number, for example if 2 is indicated then the product passes level 2 of the standard without any scratches. Severity1 -> Cheesecloth / 50 strokes / 5N – Severity2 -> Cheesecloth / 100 strokes / 5N – Severity3 -> Eraser / 20 strokes / 10N – Severity4 -> Eraser / 40 strokes / 10N” – 4 Pencil Hardness in accordance with ISO15184  – 5 Immersion 96h @40°C – 6 in accordance with SAE J2412-2015 with water spray.

For more informations contact us

Hardrise PHT06

DATASHEET
Application : Interior
Curing : UV
Substrate : PMMA
  • Layer thickness : [4µm – 6µm]
  • Optical clarity : Good
  • Refractive index : 1,54
  • Adhesion : 0
  • Immersion bac ford : Pass
  • Abrasion CS10F2 :  DHaze=0,4%
  • Falling sand abrasion test :
  • Abrasion ISO9211-4 : Severity 2
  • WoM : Don not pass
  • UV resistance :
  • Water contact Angle : 97°
  • Humid heat resistance : Pass
  • Damp heat resistance : Pass
  • Thermal shock : Pass
  • Antistatic : On demand

1 : Adhesion in accordance with ISO2409 tape 3M2525 and SCAPA 8705B  – 2 : Test conducted with a Crockmeter for 200 strokes at 7.5N. The measurement of the haze difference is carried out before and after the test. – 3  Linear abrasion test with 500g weight (or 5N) Fabric CCC-C440C (kind of gauze). The result is expressed in severity number, for example if 2 is indicated then the product passes level 2 of the standard without any scratches. Severity1 -> Cheesecloth / 50 strokes / 5N – Severity2 -> Cheesecloth / 100 strokes / 5N – Severity3 -> Eraser / 20 strokes / 10N – Severity4 -> Eraser / 40 strokes / 10N” – 4 Pencil Hardness in accordance with ISO15184  – 5 Immersion 96h @40°C – 6 in accordance with SAE J2412-2015 with water spray.

For more informations contact us

Hardrise PHT07

DATASHEET
Application : Interior
Curing : UV
Substrate : PMMA
  • Layer thickness : [4µm – 10µm]
  • Optical clarity : Good
  • Refractive index : 1,51
  • Adhesion 1 : 0
  • Immersion bac ford 5:
  • Abrasion CS10F2 2:  DHaze=0,3%
  • Falling sand abrasion test 8 :
  • Abrasion ISO9211-4 3 : Severity 2
  • WoM : Don not pass
  • UV resistance :
  • Pencil Hardness 4 : 5H
  • Water contact Angle : 92°
  • Humid heat resistance : Pass
  • Damp heat resistance : Pass
  • Thermal shock : Pass
  • Antistatic 7: On demand

1 : Adhesion in accordance with ISO2409 tape 3M2525 and SCAPA 8705B  – 2 : Test conducted with a Crockmeter for 200 strokes at 7.5N. The measurement of the haze difference is carried out before and after the test. – 3  Linear abrasion test with 500g weight (or 5N) Fabric CCC-C440C (kind of gauze). The result is expressed in severity number, for example if 2 is indicated then the product passes level 2 of the standard without any scratches. Severity1 -> Cheesecloth / 50 strokes / 5N – Severity2 -> Cheesecloth / 100 strokes / 5N – Severity3 -> Eraser / 20 strokes / 10N – Severity4 -> Eraser / 40 strokes / 10N” – 4 Pencil Hardness in accordance with ISO15184  – 5 Immersion 96h @40°C – 6 in accordance with SAE J2412-2015 with water spray.

For more informations contact us

Hardrise PHT07 pc

DATASHEET
Application : Interior
Curing : UV
Substrate : PC
  • Layer thickness : [4µm – 10µm]
  • Optical clarity : Good
  • Refractive index : 1,51
  • Adhesion 1 : 0
  • Immersion bac ford 5:
  • Abrasion CS10F2 2:  DHaze=0,3%
  • Falling sand abrasion test 8 :
  • Abrasion ISO9211-4 3 : Severity 2
  • WoM : Don not pass
  • UV resistance :
  • Pencil Hardness 4 : 5H
  • Water contact Angle : 92°
  • Humid heat resistance : Pass
  • Damp heat resistance : Pass
  • Thermal shock : Pass
  • Antistatic 7: On demand

1 : Adhesion in accordance with ISO2409 tape 3M2525 and SCAPA 8705B  – 2 : Test conducted with a Crockmeter for 200 strokes at 7.5N. The measurement of the haze difference is carried out before and after the test. – 3  Linear abrasion test with 500g weight (or 5N) Fabric CCC-C440C (kind of gauze). The result is expressed in severity number, for example if 2 is indicated then the product passes level 2 of the standard without any scratches. Severity1 -> Cheesecloth / 50 strokes / 5N – Severity2 -> Cheesecloth / 100 strokes / 5N – Severity3 -> Eraser / 20 strokes / 10N – Severity4 -> Eraser / 40 strokes / 10N” – 4 Pencil Hardness in accordance with ISO15184  – 5 Immersion 96h @40°C – 6 in accordance with SAE J2412-2015 with water spray.

For more informations contact us

HARDRISE®  applications

READING GLASSES

SENSORS

WATCHES

This website uses cookies to improve your experience. If you continue to use this site, you agree with it.